Moor Allerton Plasterers for Semis and Bungalows
Moor Allerton's post-war houses and bungalows often need a full refresh: textured ceilings covered, tired walls reskimmed and old repairs blended in. We do it in an orderly way, room by room.

Moor Allerton · LS17
Post-war semis, detached houses and bungalows
Around King Lane, Cranmer Bank and the closes near the Moor Allerton Centre, the housing is mostly post-war. Semis, detached houses and bungalows went up in brick with cavity walls, and many were finished inside with gypsum plaster on the walls and plasterboard on the ceilings. They are well built homes, generally dry and straightforward to plaster.
Their age shows in the surfaces rather than the structure. Decades of decorating fashions have left textured ceilings, swirled finishes, polystyrene tiles and wallpaper layered on wallpaper. When owners strip it back, they often find patchy repairs from earlier rewiring or heating work. That is why so many jobs here are about bringing a whole house back to flat, modern walls and ceilings.
Covering Artex and reskimming whole houses
Textured ceilings are the single most common request we get in Moor Allerton. Before anything is touched, older coatings are sample-tested so we know what they contain. The usual approach is then to seal the surface and skim over it, or to fix new plasterboard over the top and skim that. We never sand or scrape textured finishes off, as that would release dust into the house.
Many owners take the chance to reskim every room at the same time, especially when moving in or before a full redecoration. Doing the house in one planned sequence gives a consistent finish and means the dust and disruption happen once. We can also fit plain coving or replace damaged coving where the ceiling meets the walls, giving each room a neat edge.
How we plan a whole-house job in LS17
For larger jobs we agree an order of rooms, so you always have somewhere to sit, sleep and cook. Bungalows need extra thought because everything is on one floor, and we keep the working area sealed off with sheets and tape. Floors are covered from the front door to the room we are in.
We begin with a free visit to look at every room you want doing and note any textured surfaces that need testing. You then receive a written quote with each room and each task listed separately. That makes it easy to see where the work goes and to decide whether to do everything now or spread it out.
Services
Most asked-for in Moor Allerton

Skimming & reskimming
A thin, hard new face on walls and ceilings that are sound underneath but look tired, patched or lumpy.
See the service
Artex covering & removal
Swirls, stipples and peaks made flat again.
See the service
Coving & cornice
The line where wall meets ceiling, done properly.
See the serviceAlso in Moor Allerton
Everything else we do
FAQs
Plastering in Moor Allerton: questions
How do you deal with Artex ceilings in Moor Allerton homes?
Textured ceilings are very common in Moor Allerton's post-war houses. We have the coating sample-tested first. Then we either seal and skim directly over it or fit new boards and skim, depending on the condition. Scraping and sanding are never used.
Can you reskim a whole house in one go?
Yes. Many Moor Allerton owners have every room done together, often when they first move in. We work through the house in an agreed order so you always have usable rooms, and the finish is consistent throughout.
Is plastering a bungalow more disruptive?
It needs more planning, because there is no upstairs to retreat to. We seal off the room we are working in, protect the routes in and out, and plan the order so bedrooms and the kitchen are out of use for as little time as possible.
Do you fit coving as well as plastering?
We do. Plain coving gives a tidy line where walls meet the ceiling and can hide small movement cracks. We can replace damaged coving or fit new lengths at the same time as skimming the room.