Plasterboarding and dry lining in Leeds
New stud walls, boarded ceilings, insulated linings and dot and dab. Boards fixed straight and true, joints scrimmed, then skimmed ready to paint.

Plasterboarding & dry lining
What the job involves
Plasterboard does most of the heavy lifting in modern building work. It forms partition walls, lines brick walls, covers new ceilings and boxes in pipes and steels. How well it is fixed decides how good the finished wall will look, so boards are cut tight, staggered at the joints and screwed at the right spacing.
Different rooms need different boards. Bathrooms and kitchens get moisture-resistant board, garages and loft conversions may need fire-rated board, and bedrooms next to a busy room can benefit from acoustic board. On cold external walls, insulated plasterboard can make a noticeable difference to how warm a room feels.
Dot and dab is used to line masonry walls quickly with board stuck on adhesive dabs. Once the boards are up, joints are scrimmed and the whole surface is skimmed, or on some new-build jobs taped and jointed, to a smooth finish.
On the day
Step by step
- 1
Measure
We look at the layout, the background and what each board needs to do.
- 2
Frame
Studwork or battens set out plumb and level where a frame is needed.
- 3
Board
Boards cut and fixed with joints staggered and edges supported.
- 4
Finish
Joints scrimmed, beads fixed and the surface skimmed smooth.

Before you book
Good to know
Building regulations
Some partition, fire and insulation work falls under building regulations, especially in loft conversions and extensions. Check with your builder or building control if you are unsure.
Fixings for later
Heavy wall cupboards, TVs and radiators on stud walls need noggins fitted behind the board. Tell us where they will go before we board.
Areas
Plasterboarding & dry lining across Leeds
We carry out this work throughout the city and in the towns and villages around it, including these areas.
All areasFAQs
Questions about plasterboarding and dry lining
What is dry lining?
Fixing plasterboard to a wall instead of applying wet base coats directly to the brick. It is quicker to dry, and the boards are then skimmed for a smooth finish.
Should I use insulated plasterboard?
On cold solid external walls it can make a room noticeably warmer. It does take some space from the room, and needs care around windows and sockets. We will talk it through.
Can you put up a stud wall to split a room?
Yes. We build the frame, board both sides and skim it. Doors, sockets and switches are planned in with your other trades before boarding.
Do you board and skim or tape and joint?
Mostly board and skim, which gives a harder, more even surface. Tape and joint is sometimes used on new builds, and we can do either.
Walls or ceilings need sorting?
We come out, look at the plaster with you and send a written quote. Free, and no obligation.