Lime plastering in Leeds
Old solid walls need to breathe. Lime plaster lets moisture move through them the way the house was built to, where modern gypsum and cement can trap it.

Lime plastering
What the job involves
Before the twentieth century, houses across Leeds, Wharfedale and the surrounding villages were built with solid stone or brick walls and lime mortar, then plastered with lime. These walls take on a little moisture and let it out again. Covering them with gypsum plaster, cement render or plastic paint can stop that happening, and the moisture then shows up as damp patches, salt and blown plaster.
Lime plaster is slower and more demanding to work with than gypsum. It is applied in several thinner coats, each one left to firm up before the next, and it has to be protected from drying too fast. The result is a softer, slightly more forgiving finish that suits the character of an old house and lets the walls behave as they should.
We repair existing lime plaster in place, replaster walls in lime where gypsum has failed, and carry out lath and lime ceiling repairs. Outside, lime render and pointing can be used on old stone walls instead of cement.
On the day
Step by step
- 1
Assess
We look at the walls, existing plaster and any damp before choosing materials.
- 2
Remove
Failed gypsum or cement coatings carefully taken off where needed.
- 3
Build up
Lime applied in coats, each left to cure and kept damp as it firms.
- 4
Finish
A lime finish coat, ready for breathable paint when fully cured.

Before you book
Good to know
Curing time
Lime takes much longer to cure than gypsum. Allow for this in your programme, especially before decorating.
Paint choice
Painting lime with a vinyl emulsion defeats the point. Limewash, clay or mineral paints keep the wall breathable.
Areas
Lime plastering across Leeds
We carry out this work throughout the city and in the towns and villages around it, including these areas.
All areasFAQs
Questions about lime plastering
Does my house need lime plaster?
If it was built before about 1919 with solid walls, there is a good chance lime is the right material, especially where gypsum or cement coatings have caused damp. We check before recommending it.
Is lime plaster more expensive than gypsum?
It usually takes more time because of the extra coats and curing, which affects the cost. The difference is often worth it for an old house.
Can you patch lime plaster with gypsum?
It is better not to. Gypsum patches in a lime wall can trap moisture and fail. We repair lime with lime.
Can you plaster a listed building?
Yes. Lime plastering is often the preferred approach in listed buildings. Check with your conservation officer if consent may be needed for the work.
Walls or ceilings need sorting?
We come out, look at the plaster with you and send a written quote. Free, and no obligation.