Skimming and reskimming in Leeds
A thin, hard new face on walls and ceilings that are sound underneath but look tired, patched or lumpy. The quickest way to a room that feels brand new.

Skimming & reskimming
What the job involves
Most rooms in Leeds do not need their plaster stripping off. The backing is still firmly stuck to the brick; it is the surface that has gone wrong, with years of filler, hairline cracks, nail holes and the ghost of every picture frame. A skim lays two thin coats of finishing plaster over the top and trowels them up to a glassy, even face.
Before a trowel touches the wall we check it is worth skimming. Hollow patches are tapped out and cut back, loose areas are made good, and painted or shiny surfaces get a bonding primer so the new coat grips. Corners get fresh angle bead where the old arrises are chipped, so the edges finish straight and sharp.
Skimming is also the usual fix for ceilings with cracked joints, walls where wallpaper has pulled the face off, and rooms where an old textured finish has been covered over. Done well, it is the base every decorator hopes to find.
On the day
Step by step
- 1
Check
Tap the walls for hollow spots, note cracks and agree exactly which surfaces are being skimmed.
- 2
Protect
Floors sheeted, doorways screened and furniture moved out or covered.
- 3
Prime
Repairs done, beads fixed and the background primed so the plaster bonds.
- 4
Skim
Two coats laid on and trowelled up to a smooth, closed finish.

Before you book
Good to know
Drying out
New skim turns from dark pink to an even pale pink as it dries. That usually takes several days, longer in cold or damp weather, and it should not be painted until the colour is even.
Mist coat first
Fresh plaster is thirsty. The first coat of paint should be a thinned emulsion so it soaks in and grips, rather than peeling off later.
Areas
Skimming & reskimming across Leeds
We carry out this work throughout the city and in the towns and villages around it, including these areas.
All areasFAQs
Questions about skimming and reskimming
What is the difference between skimming and plastering?
Skimming puts a thin finish coat over existing plaster or plasterboard that is still sound. Replastering means stripping the old plaster back to brick and building up new base and finish coats. If the walls are firmly bonded, a skim is usually all that is needed.
Can you skim over painted walls?
Yes, once any flaking paint is scraped back and the surface is treated with a bonding primer. That gives the new plaster something to key into.
How long before I can paint new skim?
Once it has dried to an even pale colour all over, which commonly takes several days to a week or more depending on the weather and ventilation. Then a mist coat goes on first.
Can you skim a ceiling with old Artex on it?
Usually, yes. The ceiling is checked and sealed first, then skimmed over. See our Artex page for how we deal with older textured coatings.
Walls or ceilings need sorting?
We come out, look at the plaster with you and send a written quote. Free, and no obligation.