Tingley Plasterer for Semis and Estate Houses
Flat ceilings, freshly skimmed walls and plastering for extensions across Tingley, from the inter-war semis along Dewsbury Road to the estates near the Tingley roundabout.

Tingley · WF3
Semis and estates near the Tingley roundabout
Tingley sits on high ground south-west of Leeds, close to the M62 and the roundabout that carries its name. Along Dewsbury Road and Westerton Road there are inter-war and post-war semis, while larger estates of later private housing spread out on the surrounding land. Most of these are brick houses with cavity walls and gypsum plaster finishes.
The inter-war semis often have backing coats of sand and cement or older plaster on brick, with ceilings that may be plasterboard or, in some cases, earlier lath. The later estate houses are typically blockwork with plaster or plasterboard on dabs. Both types respond well to skimming, but the backing determines how we deal with cracks, hollow spots and new fixings.
Dated ceilings and tired walls in Tingley homes
Textured ceilings are common in both the semis and the estate houses. A sample is tested before anything is disturbed, as older coatings may contain asbestos. We then seal and skim over the texture, or overboard and skim if the ceiling is uneven or cracked, leaving the original coating sealed. This gives a flat, modern ceiling that suits new lighting.
Walls in the inter-war semis often have hollow areas, cracks around windows and doors, and layers of earlier repairs. Loose areas are cut out and patched, and the wall is skimmed. In the estate houses, dented board, joint cracks and filled holes are more typical, and a skim tidies them up. Where rooms have been knocked through or extended, new and old surfaces are boarded and blended.
Planning plastering in Tingley
Houses in Tingley usually have driveways or room to park nearby, which makes access simple. We protect floors and stairs and keep dust contained, so you can keep living in the house. When several rooms are involved, we agree an order with you so the kitchen and a living area stay usable throughout the job.
Plastering often follows other work, such as rewiring, new windows or a kitchen. Let us know what else is planned, and we will fit in at the right stage. On the free visit, we look at each room and explain the options, then send a written quote that lists every wall and ceiling included, so it is clear what you are getting.
Services
Most asked-for in Tingley

Skimming & reskimming
A thin, hard new face on walls and ceilings that are sound underneath but look tired, patched or lumpy.
See the service
Artex covering & removal
Swirls, stipples and peaks made flat again.
See the service
New builds & extensions
Board, skim and make good on extensions, loft conversions, garage conversions and full renovations, fitted around your builder and the other trades.
See the serviceAlso in Tingley
Everything else we do
FAQs
Plastering in Tingley: questions
Can you make a Tingley semi's ceilings smooth again?
Yes. Textured ceilings in Tingley semis are sample-tested first, then sealed and skimmed, or overboarded and skimmed where needed. The original coating stays sealed underneath and is not sanded or scraped. The finished ceiling is flat and ready for paint.
What causes cracks around my windows?
Cracks spreading from window corners usually come from small movements around the lintel and shrinkage in older plaster. Most are cosmetic and can be repaired and skimmed. Wide or growing cracks, especially those visible outside, should be checked by a builder or surveyor first.
Do you plaster extensions in Tingley?
We do. When a Tingley extension is watertight and first-fix work is complete, we board and skim the new walls and ceilings and blend them into the existing house. We can work to the builder's programme if you let us know the dates.
Should I skim walls before fitting a new kitchen?
It is usually best to plaster after first-fix electrics and plumbing, and before units and tiles go in. That way chases and repairs are covered and the walls are flat for fitting. We can coordinate with your kitchen fitter on the timing.